Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

 

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their initial settings. 
Be sure to use the buttons on the receiver for 
this operation.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

After “CLEARING” appears on the 
display for a while, “CLEARED!” 
appears.
All the settings you have changed or 
adjusted are reset to the initial settings.

You can select the front speakers you want to 
drive. 
Be sure to use the buttons on the receiver for 
this operation.

* To select “SP B” or “SP A B”, set “SB Assign” to 

“Speaker B” in the Speaker Settings menu 

 

Press SPEAKERS repeatedly until the “SP A” 
and “SP B” indicators on the display do not 
light up. “SPK OFF” appears on the display.

You cannot switch the front speaker system by 
pressing SPEAKERS when the headphones are 
connected.

?/1

 

The SPEAKERS FRONT A 

 

terminals

SP A

The SPEAKERS SURROUND 
BACK/FRONT HIGH/BI-AMP/
FRONT B terminals

SP B*

Both the SPEAKERS FRONT A and 
SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B 
terminals (parallel connection)

SP A B*

SPEAKERS