Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

V/v repeatedly to select 

• ON: You can enjoy the S-AIR receiver 

while the S-AIR main unit is in standby 
mode or turned on.

• OFF: You cannot enjoy the S-AIR 

receiver while the S-AIR main unit is in 
standby mode.

Press MENU.

• When you set “S-AIR Stby” to “ON”, the power 

consumption increases during the standby mode.

• When the wireless transmitter is removed from the 

S-AIR main unit, “S-AIR Stby” is set to “OFF” 
automatically.

• If you have selected TUNER (FM/AM band) on 

the S-AIR main unit before you turn it off and 

 

“S-AIR Stby” is set to “ON”, you can only select 
the same band for the tuner on the S-AIR receiver. 
However, you can select input other than TUNER 
on the S-AIR receiver.

• The sound of the S-AIR receiver may be cut off by 

operation of the S-AIR main unit.

• When the receiver is in standby mode, 

“A.STANDBY” appears on the display if “S-AIR 
Stby” is set to “ON”.

 

When you connect components to both digital 
and analog audio input jacks on the receiver, 
you can fix the audio input mode to either of 
them, or switch from one to the other, 
depending on the type of material you intend 
to watch.

You can also use the input buttons on the 
remote.

The selected audio input mode appears on 
the display.

x AUTO

Gives priority to digital audio signals when 
there are both digital and analog connections.
If there are no digital audio signals, analog 
audio signals are selected.

x ANALOG

Specifies the analog audio signals input to the 
AUDIO IN (L/R) jacks.