Sony STR-DN2010 User Manual

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

 

 

 

 

 

 

 

 

 

Press 

V/v repeatedly and 

 to 

uncheck the items you do not want to 
measure, then press 

b. 

The confirmation screen, asking whether 
you are ready to start measurement, 
appears.

Press 

 to select “Start”.

The measurement results is registered as 
the position you selected in step 1.

Repeat step 1 to 4 to register another 
seating position. 

Press 

V/v repeatedly to select the position 

(Pos. 1, 2, 3) you want, then press 

.

The registered seating position is selected.

You can rename the position name.

Select the position (Pos. 1, 2, 3) you 
want, then press 

.

Press TOOLS/OPTIONS. 

Select “Name Input”, then press 

.

Press 

V/v repeatedly to select a 

character, then press 

b. 

You can move the input position backward 
and forward by pressing 

B/b.

Repeat step 4 to input a character one 
by one, then press 

. 

The name you entered is registered.

You can adjust each speaker manually.
You can also adjust the speaker levels after the 
Auto Calibration is completed.

The speaker settings are only for the current seating 
position. 

Select “Speaker Pattern” according to the 
speaker system which you are using. Select the 
speaker pattern before you perform Auto 
Calibration.

Lets you set the SPEAKERS SURROUND 
BACK/FRONT HIGH/BI-AMP/FRONT B 
terminals for a bi-amplifier or speakers front B 
connection.

x OFF

x BI-AMP

x SPEAKER B

When you change the connection from a bi-
amplifier or speakers front B to surround back or 
front high speakers connection, set “Sur Back 
Assign” to “OFF”, then set up the speakers again. 
See “Auto Calibration” (page 42) or “Manual 
Setup” (page 110).