Sony STR-DN2010 User Manual

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

 

2

and hold ?/1, then press 

 

AV ?/1.

The RM SET UP indicator flashes 3 
times.

All the contents of the remote’s memory 
(i.e., all the programmed data) are 
cleared.

Should any solid object or liquid fall into the 
cabinet, unplug the receiver and have it 
checked by qualified personnel before 
operating it any further.

• Before operating the receiver, check that the 

operating voltage is identical with your local 
power supply.

 

The operating voltage is indicated on the 
nameplate on the back of the receiver.

• The unit is not disconnected from the AC 

power source (mains) as long as it is 
connected to the wall outlet, even if the unit 
itself has been turned off.

• If you are not going to use the receiver for a 

long time, be sure to disconnect the receiver 
from the wall outlet. To disconnect the AC 
power cord (mains lead), grasp the plug 
itself; never pull the cord.

• (USA model only)

 

One blade of the plug is wider than the other 
for the purpose of safety and will fit into the 
wall outlet only one way. If you are unable to 
insert the plug fully into the outlet, contact 
your dealer.

• The AC power cord (mains lead) must be 

changed only at a qualified service shop.

Although the receiver heats up during 
operation, this is not a malfunction. If you 
continuously use this receiver at a large 
volume, the cabinet temperature of the top, 
side and bottom rises considerably. To avoid 
burning yourself, do not touch the cabinet.