Sony STR-DN2010 User Manual

Page of 152
60
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm
masterpage: Left
STR-DN2010
4-182-049-11(1)
Recording using the 
receiver
You can record from a video/audio component 
using the receiver. Refer to the operating 
instructions supplied with your recording 
component.
You can record onto a CD-R using the 
receiver. Refer to the operating instructions 
supplied with your CD recorder.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR +/–
 
on the receiver.
2
Prepare the playback 
component for playing.
For example, tune to the radio station you 
want to record (page 61).
3
Prepare the recording 
component.
Insert a blank CD-R into the CD recorder 
and adjust the recording level.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Note
Sound adjustments do not affect the signal output 
from the SA-CD/CD/CD-R AUDIO OUT jacks.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR +/–
 
on the receiver.
2
Prepare the playback 
component for playing.
For example, insert the video tape you 
want to copy into the VCR.
3
Prepare the recording 
component.
Insert a blank video tape, etc. into the 
recording component (connected to 
VIDEO 1 OUT jacks) for recording.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Recording onto a CD-R
V/v/B/b,  
GUI MODE
Input 
buttons
Recording with a video 
component