Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. STR-DN840
  5. User Manual

Sony STR-DN840 User Manual

Download
Page of 128
36
US
* To select “SP B” or “SP A+B”, set the “SB 
Assign” to “Speaker B” in the Speaker Settings 
menu (page 90).
This setting is not available when headphones are 
connected.
To cancel Auto Calibration
The Auto Calibration function will be 
canceled when you perform the following 
during the measurement process:
– Press ?/1.
– Press the input buttons on the remote 
control or turn the INPUT SELECTOR 
on the receiver.
– Press .
– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.
To set up the receiver 
manually
Configuring the network 
settings of the receiver
The network settings for the receiver must 
be set correctly to use the Home Network, 
SEN, AirPlay, and PARTY STREAMING 
functions.
1
Press HOME.
The home menu is displayed on the TV 
screen.
2
Press 
V/v repeatedly to select 
“Settings”, then press 
.
3
Press 
V/v repeatedly to select 
“Network Settings”, then press 
.
4
Press 
V/v repeatedly to select 
“Internet Settings”, then press 
.
5
Press 
V/v repeatedly to select 
“Wired Setup”, then press 
.
If “Change Settings?” appears on the 
TV screen, select “OK”, then press 
.
6
Press 
V/v repeatedly to select 
“Auto”, then press 
.
IP settings information appears on the 
TV screen.
When using a fixed IP address
Select “Custom”, then press 
. The 
IP Address Setting appears on the TV 
screen. 
Press . 
Press 
V/v to select the value 
for “IP Address”. Press 
b to key in the 
value for the next position. Press 
 to 
exit cursor. 
Next, enter the value for “Subnet 
Mask” and “Default Gateway”. Press 
b for DNS Settings page. Then enter 
the value for “Primary DNS” and 
“Secondary DNS”.
“SPK OFF” appears on the 
display panel.
No audio signals are output from 
any speaker terminals.
Note
Indicators Selected speakers
Using a wired LAN 
connection
HOME
DISPLAY
V/v/B/b,