Sony STR-DA7100ES User Manual

Connect the supplied AC power cord to the AC 
IN terminal on the receiver, then connect the 
AC power cord to a wall outlet.

* A several space is left between the plug and the 

rear panel even when the power cord is inserted 
firmly. The cord is supposed be connected this 
way. This is not malfunction.

** The configuration, shape, and number of AC 

outlets will vary according to the area code of 
receiver’s you purchased.

• The AC OUTLET(s) on the rear of the receiver is a 

switched outlet, which supplies power to the 
connected component only while the receiver is 
turned on.

• Make sure that the total power consumption of the 

component(s) connected to the receiver’s AC 
OUTLET(s) does not exceed the wattage stated on 
the rear panel. Do not connect high-wattage 
electrical home appliances such as electric irons, 
fans, or TVs to this outlet. This may cause a 
malfunction.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their factory defaults.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

“ENTER to Clear ALL” appears on the 
display for 10 seconds.

AC power cord 
(supplied)

AC OUTLET**

AC IN terminal

To the wall outlet