Sony STR-DH740 User Manual
74
GB
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use
this troubleshooting guide to help you
remedy the problem. Should any problem
persists, consult your nearest Sony dealer.
Note that if service personnel changes
some parts during repair, these parts may
be retained.
difficulties while using the receiver, use
this troubleshooting guide to help you
remedy the problem. Should any problem
persists, consult your nearest Sony dealer.
Note that if service personnel changes
some parts during repair, these parts may
be retained.
The receiver is turned off
automatically.
automatically.
• “Auto Standby” is set to “On”
• The Sleep Timer function is working
• “PROTECTOR” is working (page 80).
No image appears on the TV.
• Select the appropriate input using the
input buttons.
• Set your TV to the appropriate input
mode.
• Move your audio equipment away
from the TV.
• Make sure that cables are correctly and
securely connected to equipment.
• Depending on the playback
equipment, you may need to set up the
equipment. Refer to the operating
instructions supplied with each
equipment.
equipment. Refer to the operating
instructions supplied with each
equipment.
• Be sure to use a High Speed HDMI
cable when you view images or listen
to sound, especially for the 1080p,
Deep Color (Deep Colour), 4K or 3D
transmission.
to sound, especially for the 1080p,
Deep Color (Deep Colour), 4K or 3D
transmission.
No 3D image appears on the TV.
• Depending on the TV or the video
equipment, 3D images may not be
displayed.
displayed.
No 4K image appears on the TV.
• Depending on the TV or the video
equipment, 4K images may not be
displayed. Check the video capability
and setting of your TV and video
equipment. Also, make sure to connect
the video equipment to 4K available
HDMI IN jack of this receiver.
displayed. Check the video capability
and setting of your TV and video
equipment. Also, make sure to connect
the video equipment to 4K available
HDMI IN jack of this receiver.
When the receiver is in standby mode,
there is no image output from the TV.
there is no image output from the TV.
• When the receiver enters into standby
mode, image is from the last HDMI
equipment selection before you turned
off the receiver. If you are enjoying
other equipment, play the equipment
and perform the One-Touch Play
operation, or turn on the receiver to
select the HDMI equipment you want
to enjoy.
equipment selection before you turned
off the receiver. If you are enjoying
other equipment, play the equipment
and perform the One-Touch Play
operation, or turn on the receiver to
select the HDMI equipment you want
to enjoy.
• (For USA, Canada, Mexico, Australia
and Taiwan models only)
Make sure “Pass Through” is set to
“On” in the HDMI Settings menu if
you connect equipment not compatible
with the “BRAVIA” Sync to the
receiver (page 64).
Make sure “Pass Through” is set to
“On” in the HDMI Settings menu if
you connect equipment not compatible
with the “BRAVIA” Sync to the
receiver (page 64).
The OSD menu does not appear on the
TV screen.
TV screen.
• Press HOME to turn the OSD on.
• Check that the TV is connected
• Check that the TV is connected
correctly.
• Depending on the TV, the OSD menu
may take some time to appear on the
TV screen.
TV screen.
Display panel is turned off.
• If PURE DIRECT indicator lights up,
press PURE DIRECT to turn off the
function (page 49).
function (page 49).
• Press DIMMER on the receiver to
adjust the brightness of the display
panel.
panel.
Power
Image