Sony STR-DA2100ES User Manual
masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9050000_2580805131DA2100ES_US\2580805131\US03CON_STR-DA2100ES-U.fm]
18
US
model name1[STR-DA2100ES]
[2-580-805-12(1)]
Performing initial setup
operations
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH ENTER” flashes in the display.
3
Press ENTER.
“MEMORY CLEARING” appears in the
display for a while, then “MEMORY
CLEARED” appears.
The following are reset to their factory
settings.
• MASTER VOLUME.
• All settings in the SP SET UP, LEVEL,
display for a while, then “MEMORY
CLEARED” appears.
The following are reset to their factory
settings.
• MASTER VOLUME.
• All settings in the SP SET UP, LEVEL,
EQUALIZER, CUSTOMIZE, TUNER
and CIS menus.
and CIS menus.
• The sound field memorized for each
input and preset station.
• All preset stations.
• All index names for inputs and preset
• All index names for inputs and preset
stations.
You can use the SP SET UP menu to set the size,
distance and location of the speakers connected
to this receiver.
distance and location of the speakers connected
to this receiver.
1
Press ?/1 to turn on the receiver.
2
Press MAIN MENU repeatedly to select
“
“
SP SET UP
”.
3
Turn MENU to select the parameter you
want to adjust.
want to adjust.
For details, see “Speaker setup parameters”
below.
below.
Note
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
4
Turn –/+ to select the setting you want.
The setting is entered automatically.
5
Speaker setup parameters
The initial settings are underlined.
x EASY SETUP XXX (Speaker easy setup)
• YES
If you want to set up your speakers
automatically, select “YES”. You can select a
pre-defined speaker pattern (see the supplied
“Easy Setup Guide”).
automatically, select “YES”. You can select a
pre-defined speaker pattern (see the supplied
“Easy Setup Guide”).
• NO
If you want to adjust the settings of each
speaker manually, select “NO”.
speaker manually, select “NO”.
x SP PATTERN X–X
(Speaker setup pattern)
When “EASY SETUP” is set to “YES”, select
the speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press MEMORY/
ENTER to enter the selection. Check your
speaker pattern using the supplied “Easy Setup
Guide”.
the speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press MEMORY/
ENTER to enter the selection. Check your
speaker pattern using the supplied “Easy Setup
Guide”.
5: Setting up the speakers
US01COV_STR-DA2100ES-U.book Page 18 Wednesday, July 13, 2005 2:17 PM