Sony STR-DA3100ES User Manual
A
d
v
a
n
ce
d A
d A
d
ju
stm
e
nts
and
Settin
g
s
masterpage:Right
lename[E:\SEM_Janet\Revision_DA3100ES\J9050000_2514877121STRDA3100ESU\251487
121\GB06ADV_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-12(1)]
41
US
x CENTER MID XXX Hz
(Center speaker midrange frequency)
(Center speaker midrange frequency)
Initial setting: 1 kHz
You can adjust from 100 Hz to 10 kHz in 5 steps (100
Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz).
Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz).
x CENTER TREBLE XXX dB
(Center speaker treble level)
(Center speaker treble level)
x SURR/SB BASS XXX dB
(Surround/surround back speaker bass level)
(Surround/surround back speaker bass level)
x SURR/SB TRE. XXX dB
(Surround/surround back speaker treble level)
(Surround/surround back speaker treble level)
Initial setting: 0 dB
You can adjust from –10 dB to +10 dB in 1 dB steps.
x PRESET X CLEAR
(Equalizer bank clear)
(Equalizer bank clear)
You can reset the adjusted equalizer settings to the
initial setting. For details, see “Clearing stored
equalizer settings” (page 41).
initial setting. For details, see “Clearing stored
equalizer settings” (page 41).
Tip
Rotate BASS and TREBLE to adjust the front speaker
bass and treble level.
bass and treble level.
To apply the stored equalizer
1
Rotate MAIN MENU to select “EQUALIZER”
2
Rotate MENU to select “EQ PRESET”.
3
Rotate –/+ to select “EQ PRESET [1] – [5]”.
Clearing stored equalizer
settings
settings
1
Rotate MAIN MENU to select
“EQUALIZER”.
“EQUALIZER”.
2
Rotate MENU to select “EQ PRESET”.
3
Rotate +/– to select the equalizer (EQ
PRESET [1] – [5]) you want to clear.
PRESET [1] – [5]) you want to clear.
4
Rotate MENU to select “PRESET X
CLEAR”.
CLEAR”.
“X” is the number of the selected equalizer
bank.
bank.
5
Rotate –/+ to select “YES”, then press
MEMORY/ENTER.
MEMORY/ENTER.
“Are you sure?” appears in the display.
6
Rotate –/+ to select “YES”, then press
MEMORY/ENTER.
MEMORY/ENTER.
“PRESET X CLEARED!” appears in the
display and the adjusted contents of the
selected equalizer bank are cleared.
display and the adjusted contents of the
selected equalizer bank are cleared.
Using the CUSTOMIZE menu
to adjust the receiver
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
the CUSTOMIZE menu.
1
Rotate MAIN MENU to select
“CUSTOMIZE”.
“CUSTOMIZE”.
2
Rotate MENU to select the parameter.
For details, see “CUSTOMIZE menu
parameters” below.
parameters” below.
3
Rotate –/+ to adjust the selected
parameter.
parameter.
4
CUSTOMIZE menu parameters
The initial setting is underlined.
x MENU EXPAND [XXX] (Menu expanding)
• ON
The advanced parameters for the SPEAKER SET
UP, SURR SET UP and LEVEL menus are displayed
and can be adjusted.
UP, SURR SET UP and LEVEL menus are displayed
and can be adjusted.
• OFF
The advanced parameters are not displayed.
x DTS 96/24 DEC. [XXXX]
(DTS 96/24 decoding mode)
(DTS 96/24 decoding mode)
• AUTO
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
at 96 kHz sampling frequencies.
• OFF
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
back at 48 kHz sampling frequencies.
Note
This parameter is valid only in the A.F.D. mode
(page 30). In other sound fields, this parameter is
always set to “OFF”.
(page 30). In other sound fields, this parameter is
always set to “OFF”.
x SB DECODING [XXXXXX]
(Surround back decoding mode)
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the
surround back decoding mode. See page 34.
surround back decoding mode. See page 34.
• AUTO
• ON
• OFF
Advanced settings
GB01COV_STR-DA3100ES-U.book Page 41 Monday, March 28, 2005 4:08 PM