Sony 3-289-204-12(1) User Manual

Page of 140
D:\SONY HA\3289204121\01US-STRDA2400ESUC\040PLA.fm
masterpage: R-2
STR-DA2400ES
3-289-204-12(1)
P
lay
b
a
ck
53
US
Watching a DVD/Blu-ray Disc
DISPLAY
SLEEP
GUI MODE
2
3
6
6
3
MULTI CHANNEL DECODING lamp
• Refer to the operating 
instructions supplied with the 
TV and DVD player or Blu-ray 
Disc Player.
z
Select the audio format of the disc 
to be played, if necessary.
z
You can select the sound field to 
suit the movie or the music. Refer 
to page 64 for details.
Check the following if you cannot 
listen to the multi channel sound.
• Be sure the sound source 
corresponds to the multi channel 
format (the MULTI CHANNEL 
DECODING lamp on the front 
panel lights up during 
playback).
• Be sure this receiver is 
connected to the DVD player or 
Blu-ray Disc Player via a digital 
connection.
• Be sure the digital audio output 
of the DVD player or Blu-ray 
Disc Player is set up properly.
1
Turn on the TV and DVD player or Blu-ray 
Disc Player.
2
Turn on the receiver.
3
Press INPUT SELECTOR to select “DVD” or 
“BD”.
You can also use INPUT SELECTOR on this receiver to 
select “DVD” or “BD”.
4
Switch the input of the TV so that an image 
of the DVD or Blu-ray Disc is displayed.
5
Play back the disc.
6
Adjust to a suitable volume.
7
After you have finished watching a DVD or 
Blu-ray Disc, eject the disc and turn off the 
receiver, the TV, and the DVD player or Blu-
ray Disc Player.