Sony 3-289-204-12(1) User Manual

Page of 140
87
US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\090OTH.fm
masterpage: Right
STR-DA2400ES
3-289-204-12(1)
Contr
o
l f
o
r HDMI
Using the Control for 
HDMI function for 
“BRAVIA” Sync
To use “BRAVIA” Sync, set the Control for
HDMI function as explained below.
By connecting Sony components that are
compatible with the Control for HDMI
function with an HDMI cable (not supplied),
operation is simplified as follows:
• One-Touch Play: When you play back a 
component such as a DVD/Blu-ray disc 
player, the receiver and the TV are turned on 
automatically and switched to the 
appropriate HDMI input.
• System Audio Control: While watching TV, 
you can select to output the sound from the 
TV speaker or the speakers connected to the 
receiver.
• System Power Off: When you turn off the 
TV, the receiver and connected components 
are also turned off simultaneously.
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer 
Electronics Control) for HDMI (High- 
Definition Multimedia Interface).
The Control for HDMI function 
does not work in the following 
cases:
• When you connect the receiver to a 
component which does not correspond with 
Sony Control for HDMI function.
• When you connect the receiver and 
components using other than HDMI 
connection.
We recommend that you connect the receiver 
to products featuring “BRAVIA” Sync.
Note
Depending on the connected component, the 
Control for HDMI function may not work. Refer to 
the operating instructions of the component.
Control for HDMI