Sony 3-284-083-41(1) User Manual

 

 

 

 

 

You can set the receiver to turn off 
automatically at a specified time.

Each time you press the button, the display 
changes cyclically as follows:

2-00-00 

t 

1-30-00 

t 1-00-00 t 0-30-00 

t OFF

When sleep timer is activated, the display 
dims.

If you press any buttons on the remote or receiver 
after the display dims, the display brightens up. 
After a while, the display dims again if no button is 
pressed.

To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.

You can record from a video component using 
the receiver. See the operating instructions 
supplied with your recording component.

You can also use INPUT SELECTOR on 
the receiver.

For example, insert the video tape you 
want to copy into the VCR.

Insert a blank video tape, etc. into the 
recording component (VIDEO) for 
recording.

Some sources contain copy guards to prevent 
recording. In this case, you may not be able to record 
from the source.