Sony 2-680-009-12 (1) User Manual

Connect the AC power cord to a wall outlet.

Install this system so that the power cord can be 
unplugged from the wall socket immediately in the 
event of trouble.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their factory defaults. 
Be sure to use the buttons on the receiver for 
this operation.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the 
display alternately.

After “CLEARING” appears on the 
display for a while, “CLEARED” 
appears.
The following items are reset to their 
factory settings.
• All settings in the LEVEL, TONE, 

SUR, TUNER, AUDIO and SYSTEM 
menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset 

stations.

• MASTER VOLUME is set to “VOL 

MIN”.

• Input is set to “DVD”.

FRONT

+

AC power cord 

To the wall outlet

?/1