Sony 2-680-009-12 (1) User Manual

Page of 64
54
GB
Naming inputs
You can enter a name of up to 8 characters for 
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with 
the names of the connected components. 
1
Press the input button to select 
the input you want to create an 
index name for.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press control button 
V/v 
repeatedly to select “5-AUDIO”.
You can also use 
U or u on the receiver.
4
Press the control button or 
control button 
b to enter the 
menu.
You can also use ENTER or 
i on the 
receiver.
5
Press control button 
V/to 
select “NAME IN”.
You can also use 
U or u on the receiver.
6
Press the control button or 
control button 
b to enter the 
parameter.
You can also use ENTER or 
i on the 
receiver.
The cursor flashes and you can select a 
character. Follow the procedure given in 
“To create an index name” (page 51).
To return to the previous display
Press control button 
B.
You can also use 
I on the receiver.
Changing the display
You can check the sound field, etc., by 
changing the information on the display.
Be sure to use the buttons on the receiver for 
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display 
changes cyclically as follows.
All inputs except the FM and AM 
band
Index name of the input
a)
 
t Selected input 
t Sound field currently applied
FM and AM band
Program Service name
b)
 or preset station 
name
a)
 
t Frequency t Program Type 
indication
b)
 
t Radio Text indication
b)
 
Current Time indication (in 24-hour system 
mode)
b)
 
t Sound field currently applied
a)
Index name appears only when you have assigned 
one to the input or preset station (page 51, 54). 
Index name does not appear when only blank 
spaces have been entered, or it is the same as the 
input name.
b)
During 
RDS
 reception only (models of area code 
CEL, CEK only) (page 52).