Sony DH840 User Manual

D:\NORM'S JOB\SONY HA\SO0190\STR-DH730_DH830_PMRF 
01\4408151112_GB\GB04GET_STR-DH730-CEL.fm

STR-DH830/STR-DH730

4-408-151-11(2)

You can enjoy your audio/video equipment connected to the receiver by following the simple steps 
below.
Before connecting cords, be sure to disconnect the AC power cord (mains lead).

Installing and connecting the 
speakers (page 18, 20)

Connecting the TV and video 
equipment (page 22, 23)

The image quality depends on the connecting 
jack. See the illustration below. Select the 
connection according to the jacks on your 
equipment.
We recommend that you connect your video 
equipment via HDMI connection if they have 
HDMI jacks.

See “6: Connecting the AC power cord (mains 
lead)” (page 31) and “Initializing the receiver” 
(page 32).

Y

P

B

/C

B

P

R

/C

R

Select the speaker pattern (page 32), then perform 
Auto Calibration (page 33). 

You can check the speaker connection using 
“Test Tone” (page 64). If the sound is not output 
correctly, check the speaker connection.

To output multi channel digital audio, check the 
digital audio output setting on the connected 
equipment.
For a Sony Blu-ray Disc player, check that 
“Audio (HDMI)”, “Dolby Digital”, and “DTS” 
are set to “Auto”, “Dolby Digital” and “DTS” 
respectively (as of September 2011).
For a PlayStation 3, check that “BD/DVD Audio 
Output Format (HDMI)” and “BD Audio Output 
Format (Optical Digital)” are set to “Bitstream” 
(with system software version 3.70).
For details, refer to the operating instructions 
supplied with the connected equipment.