Sony DRC-BT30 Manual

DRC-BT30 [US, ES]_4-156-247-51(1)

Bluetooth devices need to be “paired” 

with each other beforehand. 

Once Bluetooth devices are paired, 

there is no need for pairing again, 

except in the following cases:

  Pairing information is deleted after 

repair, etc.

  When you attempt to pair with 9 or 

more devices.  

This unit can be paired with up to 8 

devices; if a new device is paired 

after 8 devices have been paired, the 

device whose latest connection time 

is the oldest among the 8 paired 

devices is replaced by the new one. 

  When recognition of the unit by the 

device to be connected is deleted.

  This unit is initialized (page 25). All 

pairing information is deleted.

  Place the Bluetooth device 

  Open the cover of the USB () 

jack. 
Press and hold the PAIRING 
button for  seconds or more to 
standby for pairing while the 
unit is turned off.
The indicator (blue) and indicator 

(red) flash in turn and the unit 

enters into pairing mode.

If pairing is not established within about 

5 minutes, pairing mode will be canceled 

and this unit will turn off. In this case, 

start over from step 1.