Sony HT-6500DP User Manual
Operations Using the Remote RM-U306
47
US
Changing the factory
setting of a function button
setting of a function button
If the factory settings of the FUNCTION
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
Note that the settings of the TUNER button
cannot be changed.
cannot be changed.
1
Hold down the Function button whose
function you want to change (for
example, MD/TAPE).
function you want to change (for
example, MD/TAPE).
2
Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 – Tape
deck).
component you want to assign to the
Function button (for example, 4 – Tape
deck).
The following buttons are assigned to select
the functions:
the functions:
To operate
Press
CD player
1
DAT deck
2
MD deck
3
Tape deck A
4
Tape deck B
5
LD player
6
VCR (command mode VTR 1*)
7
VCR (command mode VTR 2*)
8
VCR (command mode VTR 3*)
9
TV
0
DSS (Digital Satellite Receiver)
>10
DVD
ENTER
VCD player
.
* Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
control the tape deck.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the function buttons to
their factory setting
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
the same time.