Sony 3-289-204-41(1) User Manual

Page of 128
19
GB
C:\NORMAN\SONY HA\STR-DA2400ES\3289204411\04GB-STRDA2400ESUC\030CON_GB.fm
masterpage: Right
STR-DA2400ES
3-289-204-41(1)
Getting Star
ted
Notes
• Be sure to turn on the receiver when the video and 
audio signals of a playback component are being 
output to a TV via the receiver. If the power supply 
of the receiver is not turned on, neither video nor 
audio signals will be transmitted.
• When connecting optical digital cords, insert the 
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Depending on the status of the connection between 
the TV and the antenna (aerial), the image on the 
TV screen may be distorted. In this case, place the 
antenna (aerial) farther away from the receiver.
Tips
• The receiver has a video conversion function. For 
• The sound of the TV is output from the speakers 
connected to the receiver if you connect the audio 
output jack of the TV to the TV IN jacks of the 
receiver. In this configuration, set the sound output 
jack of the TV to “Fixed” if it can be switched 
between either “Fixed” or “Variable”.
• All the digital audio jacks are compatible with 
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.
4a: Connecting the audio 
components
This section describes how to hook up your 
components to this receiver. Before you begin, 
refer to “Component to be connected” belo
for the pages which describe how to connect 
each component.
After hooking up all your components, 
proceed to “5: Connecting the antennas 
(aerials)” (page 35).
Notes
• Before connecting cords, make sure to disconnect 
the AC power cord (mains lead).
• When connecting optical digital cords, insert the 
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with 
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.
How to hook up your 
components
Component to be connected
Page
Super Audio CD 
player, CD player
With digital audio 
output
With multi channel 
audio output
With analog audio 
output only
MD deck, Tape deck, 
Analog disc turntable
With analog audio 
output only
DIGITAL MEDIA PORT adapter