Sony 3-289-204-41(1) User Manual

C:\NORMAN\SONY HA\STR-DA2400ES\3289204411\04GB-STRDA2400ESUC\050AMP_GB.fm

STR-DA2400ES
3-289-204-41(1)

You can use the Audio settings menu to make 
settings for the audio to suit your preference. 
Select “Audio” in the Settings menu. For 
details on adjusting the parameters, see “7: 
Operating the receiver using the GUI 
(Graphical User Interface)” (page 39).

x A/V Sync

Lets you delay the output of audio to minimize 
the time gap between audio output and visual 
display. You can adjust the delay from 0 ms to 
300 ms in 10 ms steps.

• This parameter is useful when you use a large LCD 

or plasma monitor or a projector.

• This parameter is not valid when

– the multi channel input is selected.
– “Analog Direct” is being used.

x Dual Mono 

Lets you select the language you want to listen 
to during a digital broadcast. This feature only 
functions for Dolby Digital sources.
• Main/Sub

Sound of the main language will be output 
through the front left speaker, and sound of 
the sub language will be output through the 
front right speaker simultaneously.

• Main

Sound of the main language will be output.

• Sub

Sound of the sub language will be output.

x Decode Priority 

Lets you specify the input mode for the digital 
signal input to the HDMI IN jacks.
• PCM

When signals from the HDMI IN jack are 
selected, only PCM signals are output from 
the connected player. To prevent interruption 
when playback starts, set to “PCM”. When 
signals in any other format are received, set 
this item to “AUTO”.

• AUTO

Automatically switches the input mode 
between Dolby Digital, DTS or PCM.
Note

Even when “Decode Priority” is set to “PCM”, the 
sound may be interrupted at the very beginning of 
the first track depending on the CD being played 
back.