Sony 3-289-204-41(1) User Manual

C:\NORMAN\SONY HA\STR-DA2400ES\3289204411\04GB-STRDA2400ESUC\050AMP_GB.fm

STR-DA2400ES
3-289-204-41(1)

You can use the Video settings menu to make 
settings for video. Select “Video” in the 
Settings menu. For details on adjusting the 
parameters, see “7: Operating the receiver 
using the GUI (Graphical User Interface)” 
(page 39).

x Resolution

Lets you convert the resolution of analog video 
input signals.
• DIRECT
• AUTO
• 480/576i
• 480/576p
• 720p
• 1080i
• 1080p
For details on operating, see “In the video 
input/output conversion table classified by the 
menu settings” (page 34).

You can use the HDMI menu to make the 
required settings for components connected to 
the HDMI jack. Select “HDMI” in the Settings 
menu. For details on adjusting the parameters, 
see “7: Operating the receiver using the GUI 
(Graphical User Interface)” (page 39).

x Control for HDMI

Lets you turn the Control for HDMI function 
on or off. For details, see “Control for HDMI” 
(page 77).

x Audio Out

Lets you set the HDMI audio signals output 
from the playback component connected to the 
receiver via an HDMI connection.
• TV+AMP

The sound is output from TV’s speaker and 
the speakers connected to the receiver.
Notes

• The sound quality of the playback component 

depends on the TV’s sound quality, such as the 
number of channels, and the sampling 
frequency, etc. When the TV has stereo 
speakers, the sound output from the receiver is 
also stereo as that of the TV, even if you play 
back multi channel source.                                                      

• When you connect the receiver to an image 

display component (projector, etc.), sound may 
not be output from the receiver. In this case, 
select “AMP”.

• AMP

The HDMI audio signals from the playback 
component is only output to speakers 
connected to the receiver. The multi channel 
sound can be played back as it is.
Note

Audio signals are not output from the TV speakers 
when “Audio Out” is set to “AMP”.