Sony 3-289-204-41(1) User Manual

C:\NORMAN\SONY HA\STR-DA2400ES\3289204411\04GB-STRDA2400ESUC\090OTH_GB.fm

STR-DA2400ES
3-289-204-41(1)

This receiver supports the Control for HDMI-
Easy Setting function.
This function is only available for certain types 
of TV. When you perform the Control for 
HDMI-Easy Setting from the TV, the Control 
for HDMI setting on this receiver will 
automatically change accordingly.
During the Control for HDMI-Easy Setting 
operation, “SCANNING” flashes in the 
display.
This receiver will automatically change the 
input to HDMI input. When the setting is 
completed, “COMPLETE” appears on the 
display.
For details, refer to the operating instructions 
of the TV.
If your TV does not support the Control for 
HDMI-Easy Setting function, do the following
procedures. For details on setting the TV and 
connected components, refer to the operating 
instructions of the respective components.

Make sure that the receiver is connected to 
the TV and components (compatible with 
Control for HDMI function) via HDMI 
connection.

Turn on the receiver, TV and connected 
components.

Set the respective Control for HDMI 
function for the receiver and TV to on.
See “To set Control for HDMI” (page 80).
When the receiver menu is displayed on the 
TV screen in the screen mode, press GUI 
MODE repeatedly to select “GUI OFF” to 
enter the display mode, then check the TV 
display image of the component connected 
to the receiver.
For details on setting the TV, refer to the 
operating instructions of the TV.

Select the HDMI input of the receiver and 
TV to match the HDMI input of the 
connected component, so that the image 
from the connected component is displayed.

Set the Control for HDMI function for the 
connected component to on.
If the Control for HDMI function for the 
connected component is already set to on, 
you do not need to change the setting.

Repeat steps 4 and 5 for other components 
that you want to use the Control for HDMI 
function.

• If you unplug and reconnect the HDMI cable, be 

sure to repeat steps 1 to 6 above.

• You cannot perform One-Touch Play and System 

Audio Control during the Control for HDMI-Easy 
Setting operation.

• Before you do the Control for HDMI-Easy Setting 

from the TV, be sure to turn on the TV, connected 
components and receiver.

• If the playback components cannot function after 

you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting 
on your TV.

• If the connected components do not support 

Control for HDMI-Easy Setting, you need to set 
the Control for HDMI function for the connected 
components to on before you perform the Control 
for HDMI-Easy Setting from the TV.