Sony 3-289-204-41(1) User Manual

C:\NORMAN\SONY HA\STR-DA2400ES\3289204411\04GB-STRDA2400ESUC\090OTH_GB.fm

STR-DA2400ES
3-289-204-41(1)

Set “Bi-AMP Speaker” to “ON” in the 
Speaker settings menu. The same signals 
output from the FRONT SPEAKERS A jacks 
can be output from the SURROUND BACK 
SPEAKERS terminals by setting “Bi-AMP 
Speaker” to “ON”.

• You cannot use the FRONT SPEAKERS B jacks 

for a bi-amplifier connection.

• When you use the Auto Calibration function, make 

the bi-amplifier settings before you perform Auto 
Calibration.

• If you make the bi-amplifier settings, the speaker 

level, and equalizer settings of the surround back 
speakers become invalid, and those of the front 
speakers are used.

• Signals output from the PRE OUT jacks are used 

with the same settings as those of the SPEAKERS 
terminals.

You can operate this receiver using the display 
even if you do not use a GUI when a TV 
monitor is not connected.

When “GUI MODE” is displayed in the 
display window, the menu is set to display on 
the TV screen using a GUI.

V/v repeatedly to select