Sony 3-227-586-15 Manual

Setting the clock

12

To set the daylight saving time, press DST to display
the 

 indicator.

If daylight saving time is not used in your area, daylight saving
time is not currently in effect, or 

 is already displayed, proceed

to Step 4.

Hold down LOCAL TIME SET and press –?

K or k?+

to set the local time.

Each time you press –?

K or k?+, the current time will decrease or

increase by a minute. To change the digits rapidly, hold down –?

K

or 

k?+.

Two short beeps will be heard when adjusting the time to “0:00”.

Release LOCAL TIME SET.

“ : ” starts flashing and the clock starts
running.

To switch to clock display while the radio is turned on
Press EXE. The display returns to the previous condition
automatically after about 10 seconds or when EXE is pressed
again. The time display period is extended when the WORLD
TIME button is pressed during clock display, or when 

K – or

+ k is pressed during world time display. During clock display,
radio operations such as changing frequencies are not possible.
The clock will not be displayed during auto scan (page 20) or
memory scan (page 24).

For areas adopting the daylight saving time (summer time)
Press DST to display the 

 indicator if you are now in the

summer time period. When the summer time period has ended,
press DST to clear the 

 indicator. The time display will be

adjusted automatically.

Tips
• The clock is displayed in the 24 hour system.
• Press LOCAL TIME SET to stop the flashing of “0:00”.
• To adjust the time to the second, release LOCAL TIME SET at the time

of the tone.