Sony TA-N1 User Manual

7

1

1

2

3

2

CONNECTION
ASSIGNMENT

BALANCED

INPUT SELECTOR

IMPEDANCE USE       4~16

Ω

L

L

  + 

 + 

 –

 – 

R

R

 –

 –

 +

+

BALANCED

UNBALANCED

L

L

R

R

UNBALANCED

1

2

1 : GROUND
2 : HOT(+)
3 : COLD(–)

A 

+

 

B USE       8~16

Ω

–A–

–B– 

Connect the jacks on the speakers to the SPEAKERS A or
B terminals on the power amplifier using a single speaker
cord for each speaker. There is no difference in the sound
output from SPEAKERS A and B. For details, refer to the
instructions supplied with the speakers.

• Be sure to check that the amplifier is turned off before

making any connections.

• Strip both ends of the speaker cords about 10 mm

(

3

/

8

 in.) and twist the wire strands of the cord together

(A).

• Insert each end of the speaker cord fully into the

speaker terminal.
Be sure the stripped portion of the speaker cord does
not protrude outside of the speaker terminal cover
(USA/Canada only) nor from the speaker terminal (B).

Connect the jacks on the speaker to the power amplifier’s
SPEAKERS A or B terminals.

• Connect the right speaker to the “R” terminals, and

connect the left speaker to the “L” terminals.

• Be sure to match the ends of the speaker cord to the

appropriate terminal on the components:  + to + and –
to –. If the cords are reversed, the sound will be
distorted and will lack bass.

• When the maximum input level of the speakers you are

using is low, try to avoid excessive power output from
this unit to the speakers by controlling the volume on
the preamplifier. Continuously playing an audio source
at a level that distorts the audio output may damage the
speakers.

• The speaker terminals on this unit are compatible with

Y lug jack connection (European model only).

A

B