Alesis DEQ230D User Manual

Basics of Equalization 

 

This is where you will find some of  the features that govern the 

way the DEQ230 operates in the other modes. They are what you 

would call "Global" settings, in that their status is not stored with a 

program. No matter which program you call up, these settings will 

not change. And since they make such a big difference in how the 

unit works, they have been "tucked away" so they won’t be altered 

accidentally.  

 

To access Setup mode, first you must turn off  the DEQ230. Then 

turn the unit back on, wait until you see the letters “DEQ230” in 

the display, and then hold down the [STORE] button. After a 

couple of  seconds you will see the word "SETUP" appear in large 

letters above Channel A‘s [BAND SELECT] buttons. Then the 

LEDs over Channel A will read "M. LVL," and the LEDs over 

Channel B will read "+00."  

 

The first twelve [BAND SELECT] buttons of  Channel A are 

used to select between the different functions in Setup mode. They 

are:  

 

 

 

Note that as you switch from one function to the next that the 

Numeric LED Display will change to show the number of  the 

selected function.