QSC Audio 6.0 II User Manual

quasi-complementary MOSFET output with multi-step high efficiency circuit

20 Hz to 20 kHz

8 ohms per channel

1150 at 0.1% THD

4 ohms per channel

2050 at 0.1% THD

2 ohms per channel

3250 at 0.1% THD

EIA: 1 kHz @ 1% THD

8 ohms per channel

1300

4 ohms per channel

2200

2 ohms per channel

3500

Bridged Mode

16 ohms, 1 kHz, 1% THD

2600

8 ohms, 1 kHz, 1% THD

4400

4 ohms, 1 kHz, 1% THD

7000

0.77 dB

20 Hz to 20 kHz

<0.06%: 8, 4, and 2 ohms at 10 dB below rated power

20 Hz to 2 kHz

<0.02%: 1150 watts at 8 ohms, 2050 watts at 4 ohms, 3250 watts at 2 ohm

Frequency response at 10 dB below rated power

20 Hz to 20 kHz ±0.15 dB

2 Hz to  50 kHz ±3.0 dB

>2000 at 1 kHz and below

107 dB below rated output from 20 Hz to 20 kHz

40x (32 dB)

2.4 Vrms (+9.4 dBu) for rated power into 8 ohms

2.3 Vrms (+9.5 dBu) for rated power into 4 ohms

20 k ohm balanced, 10 k ohm unbalanced

AC power switch, Mode switch, Gain controls, Clip Limiter switches

Inputs: “combo” and terminal-block

Outputs:

binding posts, 60 amp rated, recommend no banana plug usage

Speakon outputs, 1 per channel for Stereo and Parallel operation only

Power Supply Control connector: 2-pin terminal block connector

Power supply section:

Power “on”- red; Standby- yellow; Protect, red (1 LED for each channel)

Signal indicator section:

Signal- green; -20 dB, yellow; -10 dB, yellow; Clip, red (1 for each channel)