Roland 210 User Manual

In the interest of product improvement, the specifications and/or appearance of this unit 
are subject to change without prior notice.

330 W (Woofer 250 W + Tweeter 80 W)

INPUT:

+4 dBu/22 k

Ω

THRU OUT:

+4 dBu

38 cm (15 inches) x 1 + Tweeter

POWER Switch, VOLUME Knob,
MODE SELECT Switch (FULL RANGE, SUB WOOFER)

TWEETER Knob

FREQUENCY Knob

FULL RANGE, SUB WOOFER

INPUT Jack (1/4” phone type)

THRU OUT Jack (1/4” phone type)

AC115V, AC 117 V, AC 220V, AC 230 V, AC 240 V (50/60 Hz)

92 W

(Excluding casters)

595 (W) x 517 (D) x 530 (H) mm

23-7/16 (W) x 20-3/8 (D) x 20-7/8 (H) inches

(Including casters)

595 (W) x 517 (D) x 581 (H) mm

23-7/16 (W) x 20-3/8 (D) x 22-7/8 (H) inches

27.0 kg / 59 lbs 9 oz

Owner’s Manual, Information sheet, Caster x 4

❑ Is the mute function switched on?

→ If you have a foot switch connected, set both the foot switch and the front panel MUTE switch to OFF.

❑ Is the power to the external effects processor turned off or the effect volume turned completely down?

→ With an external effects processor connected, and using a series connection, only the effect sound is output (p. 12). Check the 

external effects processor’s output level.

❑ Is the TWEETER knob on the D-BASS 210/115 connected to the INPUT jack turned completely down?

→ When the TWEETER knob on the D-BASS 210/115 is turned down all the way, the signals in the tweeter’s frequency range 

are not output from SUB OUT, diminishing the effect of the 115X’s TWEETER knob.