Radio Shack 15-1119A Leaflet

Cat. No.

 

15-1119A

Your TV/FM 4-Way Distribution Amplifi-
er lets you amplify and distribute the
VHF signals from cable TV or an FM
tuner, for example, to four different lo-
cations. Signal amplification is neces-
sary when a signal is split, to assure
that the signal is strong enough when it
reaches the TV, video disc player, an-
other VCR, or another FM tuner.

Important: Read the Important Safety
Instructions (supplied separately) be-
fore using this product. This amplifier is
not intended for use with outdoor VHF/
UHF antennas. For amplification of
those signals, we recommend a UHF/
VHF/FM amplified coupler.

• This amplifier is designed to

amplify existing signals and to
deliver a strong signal through mul-
tiple in-home connections. It will
not improve a poor signal.

• To avoid signal loss, reflections or

“shadows” in your picture, output
terminals that are not connected to
a receiver (TV or VCR) should be
terminated using terminating resis-
tors (RadioShack Cat. No. 15-
1144).

   

This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s en-
closure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.

This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.

Your local RadioShack store can give
you specific information for your con-
nection needs.

Note: If you want to connect an output
to a TV that has only 300-ohm screw
terminals, use a 75-to-300 ohm match-
ing transformer such as Cat. No. 15-
1140.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.

15-1119a.fm  Page 1  Thursday, July 15, 1999  11:30 AM