Mark Levinson 500H User Manual
3
Nº500H Series Power Amplifier
Register your Nº500H series amplifier online at
www.marklevinson.com within 15 days of purchase. Retain
the original, dated sales receipt as proof of warranty coverage.
www.marklevinson.com within 15 days of purchase. Retain
the original, dated sales receipt as proof of warranty coverage.
Installation Considerations
The Nº500H series power amplifier requires special care during
installation to ensure optimal performance. Pay particular
attention to instructions included in this section and to
precautions included throughout this owner’s manual.
installation to ensure optimal performance. Pay particular
attention to instructions included in this section and to
precautions included throughout this owner’s manual.
DO save all packing materials for possible future shipping needs.
DO inspect the amplifier for signs of damage during shipment.
If damage is discovered, contact your authorized Mark Levinson
dealer for assistance in making appropriate claims.
If damage is discovered, contact your authorized Mark Levinson
dealer for assistance in making appropriate claims.
DO locate and remove the accessory bag from the carton. Make
sure it contains all of the items listed in the “What’s in the Box”
table on the previous page. If not, contact your authorized Mark
Levinson dealer.
sure it contains all of the items listed in the “What’s in the Box”
table on the previous page. If not, contact your authorized Mark
Levinson dealer.
DO NOT attempt to lift or move the power amplifier without
adequate assistance. The shipping weight of the amplifier
exceeds what a single person should lift alone. To avoid injury
or damage to the unit, at least two people are required to lift or
move the amplifier.
adequate assistance. The shipping weight of the amplifier
exceeds what a single person should lift alone. To avoid injury
or damage to the unit, at least two people are required to lift or
move the amplifier.
Two pairs of knit white gloves with special gripping surfaces
on the palms and fingers are ncluded with the amplifier. Wear
these gloves when lifting or moving the amplifier.
on the palms and fingers are ncluded with the amplifier. Wear
these gloves when lifting or moving the amplifier.
DO install the power amplifier on its own shelf for proper
ventilation.
ventilation.
DO install the amplifier chassis on a solid, flat, level surface.
DO install the power amplifier close to associated components to
keep interconnecting cables as short as possible.
keep interconnecting cables as short as possible.
DO select a dry, well-ventilated location out of direct sunlight.
DO allow at least 3 to 4 inches (8 to 10cm) of clearance above and
on each side of the amplifier for proper heat dissipation.
on each side of the amplifier for proper heat dissipation.
Product Registration
Unpacking
Caution!
Placement and
Ventilation