Mark Levinson 433 User Manual
33
Nº433 Power Amplifier
Rack-Mounting
If you need or prefer to rack mount your amplifiers contact your
Mark Levinson dealer for information about the optional rack
mount kit. This purpose-designed assembly provides the needed
ventilation for the heat sink “chimneys” of the amplifier, as well as
the support required for this heavy component.
Mark Levinson dealer for information about the optional rack
mount kit. This purpose-designed assembly provides the needed
ventilation for the heat sink “chimneys” of the amplifier, as well as
the support required for this heavy component.
To use the rack mount kit, bolt the shelf securely to the rack,
remove the four feet from the bottom of the amplifier, slide the
amplifier into place and secure the amplifier to the shelf using the
two remaining screws (provided with the kit). Slots on the rear of
the shelf may be used for dressing cables or using cable ties.
remove the four feet from the bottom of the amplifier, slide the
amplifier into place and secure the amplifier to the shelf using the
two remaining screws (provided with the kit). Slots on the rear of
the shelf may be used for dressing cables or using cable ties.
The drawing below will help you visualize the assembly.
The mounted Nº433 amplifier and rack mount kit occupies four
standard rack units of height.
standard rack units of height.