Marantz 5411 10586 001M User Manual

Page of 18
2
ENGLISH
Features
Current feedback discrete power amp
This is equipped with a current feedback power amp that uses the 
complimentary push-pull circuit used in the SM-11S1 Marantz Hi-Fi 
power amp. This amp provides increased operating stability, and 
high-speed, wide ranging high-density playback. 
The current/voltage conversion amplifi cation section in the latter 
part of the power amp is equipped with a Wilson current mirror 
circuit that amplifi es to the high sound range with low distortion. 
Improved instant power supply capability
The fi nal stage of the power amp is equipped with the same LAPT 
(high effi ciency power transistor) that is installed in the SM-11S1 
Marantz Hi-Fi power amp, providing improved instant power supply 
capability. 
The power section is equipped with a large-sized transformer. 
As one of the essential parts of the power section, this unit is 
equipped with Marantz original 33,000 μF / 71 V×2 (MM7055), and 
15,000 μF / 71 V×2 (MM7025) block condensers, which have been 
repeatedly tested for sound quality. 
These improvements to the power supply capability provide a 
powerful, presence-fi lled sound. 
High sound quality design based on pure surround 
philosophy
Equipped with a chimney-shaped heat sink to effi ciently  process 
the heat emitted from each channel amp , and exceptionally quiet 
cooling fans. A high-sensitivity temperature sensor IC is used to 
control the cooling fans, adjusting the rotation speed to match the 
amount of heat generated by the amp. 
These components provide the sound quality and low-noise you 
would expect at a high-end theater. 
In addition, this unit is designed for superb quality sound, and is 
equipped with high quality components such as a high-end audio 
condenser and fi lm condenser throughout.
BALANCED/UNBALANCED selecting function
Depending on the desired use, input for each channel can be 
selected between BALANCED input and UNBALANCED input. 
Remote Power Control
This unit is equipped with a remote power control function. When 
a Marantz AV Pretuner AV8003 or AV7005 is connected to this 
unit, this unit’s power can be switched ON/OFF together with the 
AV8003 or AV7005 power supply. 
Connection to the AV8003 or AV7005 is a ground fl oating 
connection that prevents negative infl uences on sound quality as 
far as possible. 
Other Functions
Equipped with IR fl ash input that supports custom installations, 
and DC trigger input and output terminals. 
Cautions on handling
• Before turning the power switch on
Check once again that all connections are correct and that there are 
no problems with the connection cables. 
• Power is supplied to some of the circuitry even when the unit is 
set to the standby mode. When going on vacation or leaving home 
for long periods of time, be sure to unplug the power cord from the 
power outlet.
•  About condensation
If there is a major difference in temperature between the inside of 
the unit and the surroundings, condensation (dew) may form on 
the operating parts inside the unit, causing the unit not to operate 
properly.
If this happens, let the unit sit for an hour or two with the power 
turned off and wait until there is little difference in temperature 
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that 
occurs, move the mobile phone away from this unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power 
outlet. Next, disconnect the connection cables to other system units 
before moving the unit.
• About Care
• Wipe the cabinet and control panel clean with a soft cloth.
• Follow the instructions when using a chemical cleaner.
• Benzene, paint thinner or other organic solvents as well as 
insecticide may cause material changes and discoloration if brought 
into contact with the unit, and should therefore not be used.
MM7055_7025U_ENG_1st_0728.indd   2
MM7055_7025U_ENG_1st_0728.indd   2
2010/07/29   20:55:44
2010/07/29   20:55:44