Madrigal Imaging N380S User Manual
16
Remote Control
1
MONO
Pressing this button will toggle the Nº380S in and out of the
Pressing this button will toggle the Nº380S in and out of the
mono
mode,
having the same effect as pressing the front panel
mono
button. Mono
mode activates circuitry which combines Left and Right input signals, and
sends the resulting monophonic signal to both Left and Right outputs. This
circuit is particularly useful when listening to older, monophonic source ma-
terial, at which time significant noise reduction may be realized.
sends the resulting monophonic signal to both Left and Right outputs. This
circuit is particularly useful when listening to older, monophonic source ma-
terial, at which time significant noise reduction may be realized.
mode
display
polarity
mono
1
2
3
4
5
6
volume
mute
1
2
3
6
7
5
4
MADRIGAL AUDIO LABORATORIES
R
2
DISPLAY
Duplicates the function of the
Duplicates the function of the
display intensity
button on the front panel,
cycling among four levels of brightness (including “off”) for the display, al-
lowing adjustment for various ambient lighting conditions. (Tip: If pressed
and held for several seconds, the display button will place your Nº380S in
Standby.)
lowing adjustment for various ambient lighting conditions. (Tip: If pressed
and held for several seconds, the display button will place your Nº380S in
Standby.)
3
SOURCE SELECTION
These buttons provide remote selection of the six inputs of the Nº380S.
Pressing any of these buttons (or the
These buttons provide remote selection of the six inputs of the Nº380S.
Pressing any of these buttons (or the
volume +/-
buttons) while the Nº380S
is in standby will bring it fully on and operational. These buttons are gray
instead of black to serve as a reminder of this secondary function.
instead of black to serve as a reminder of this secondary function.
4
VOLUME +/-
Raises the volume at either low speed for fine adjustments or high speeds
for larger changes. The Nº380S will slowly raise its output for the first 1.5
seconds this button is depressed, then move to higher rates of change.
Raises the volume at either low speed for fine adjustments or high speeds
for larger changes. The Nº380S will slowly raise its output for the first 1.5
seconds this button is depressed, then move to higher rates of change.
Pressing either
volume +/-
button while the Nº380S is in standby will bring
it fully on and operational. These buttons are gray instead of black to serve
as a reminder of this secondary function.
as a reminder of this secondary function.
Note that all volume and balance functions are disabled if a surround
sound processor [“ssp”] input is selected. For more information on this spe-
cial feature of the Nº380S’ design, see “Using Surround Sound Processors.”
sound processor [“ssp”] input is selected. For more information on this spe-
cial feature of the Nº380S’ design, see “Using Surround Sound Processors.”
5
POLARITY
Inverts the
Inverts the
polarity
(sometimes inaccurately called “absolute phase”) of the
outputs of the Nº380S. A second press of this button will restore the out-
puts to their original, non-inverting polarity.
puts to their original, non-inverting polarity.
6
MODE
Duplicates the function of the Mode button on the front panel, cycling
through
Duplicates the function of the Mode button on the front panel, cycling
through
monitor, record select,
and
balance
modes. As with the front panel
button, use it in conjunction with the Source Selection buttons when in ei-
ther
ther
monitor
or
record select
mode and with the
volume +/-
buttons when
in
balance
mode.