Samsung VP-D250 User Manual

✤

The amount of continuous recording time available depends on.
-

The type and capacity of the battery pack you are using.

-  How often the Zoom function is used.

It is recommended that you have several batteries available.

1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and connect the AC

cord to a wall socket.

3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the Camera power switch to off, and the charging indicator will

start to flash, showing that the battery is charging.

5. When the battery is fully charged, disconnect the battery pack and the AC Power adapter from the camcorder.

■

Even with the power switched off, the battery pack will still discharge if it is left connected to the camcorder.

Notes

■

The battery pack may be charged a little at the time of purchase.

■

To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after 
it is fully charged.

Once per second

Less than 50%

Twice per second

50% ~ 75% 

Three times per second

75%  ~  90%

Blinking stops and stays on

90 ~ 100%

On for a second and    

Error - Reset the battery pack and 

off for a second

the DC cable 

TAPE

EJECT

VOL/M

CHARGE

5

00709E VP-D230(i) UK (01~27)  12/1/03 9:04 AM  Page 24