LevelOne FCS-3031 User Manual

Page of 3

PoE PIR IP Dome Camera 
FCS-3031
H/W Version: 1
Product Overview
FCS-3031 is a Dome Type PoE Network Camera for 
consumer markets. This IP Camera comes with a high-
quality progressive 1/4” CMOS sensor. It also streams 
real-time audio and video in MPEG4/MJPEG video 
compression formats over a PoE enabled LAN network 
or in 3GPP compression format for streaming over a 
3G mobile network.
Powerful, feature rich PoE IP Network Camera
Despite its compact size, FCS-3031 features fixed focus 
lens, two-way audio capability, and excellent video 
quality. IEEE 802.3af PoE compliant, users can install 
the camera without concerns about the power outlet 
located near the camera for easy deployment of a PoE 
enable LAN network. 
Passive InfraRed (PIR) Sensor 
When people pass by or in an emergency situation, 
the built-in PIR motion detection sensor will “detect” 
and start recording automatically, which is able to 
detect movement up to 5 meters away. 
When motion is detected at the specified regions, the 
additional function of alarm notification can send an 
E-mail alert or send captured images via FTP upload 
to a designated storage server. 
Bundled LevelOne IP CamSecure Lite
FCS-3031 comes bundled with the LevelOne IP 
CamSecure Lite Surveillance Management Software. 
This allows users to monitor cameras up to 32 
channels simultaneously.
Key Features
-  High-quality Progressive 1/4” CMOS image sensor at 
VGA (640x480) resolution
-  Provide MPEG4 Simple Profile and MJPEG video 
streams simultaneously (up to 30fps)
-  Supports analog output (NTSC/PAL) for installation 
purpose
-  Hardware 128-bit AES and 64-bit DES/3DES data 
encryption 
-  Supports dual directions voice (G.726 at 8K sampling 
rate and 16K bit rate) in full duplex
-  Supports up to 10 viewers simultaneously
-  Motion Detection by analyzing the video stream 
-  Supports HTTP streaming in MPEG4 and MJPEG 
video format 
-  Provide 1 additional 160x120 MPEG4 video stream 
for cell phone access (through RTP)
-  Built-in PIR Sensor for Motion Detection 
Works Well With
1. PIR Sensor
2. Lens
3. DC Power Jack
4. RJ-45 Ethernet Port
5. I/O Ports
6. Reset Button
7. 3.5mm Phone Jack 
NVR-0204
4-CH Network Video Recorder
WBR-6022
300Mbps HomeGuard 22 
Residential Gateway
1
2
3 4 5 6 7