Perreaux SX25i User Manual

 
 

 

16

7

7

7

7    

Care and Maintenance 

Note:  Please switch the unit off and remove the cord set from the 

rear of the Amplifier before attempting to clean your SX25i 
in the manner described below. 
Never apply liquid directly to the SX25i. 
Never use abrasives. 
Never rub in a circular motion. 

Cover  The cover features a durable high quality powder coat finish.  To 

remove finger marks and dirt, lightly rub the surface with a soft 
cloth. 

If the dirt is not removed, dip your cloth in a mild solution of 
soap and water, squeeze excess moisture from it and then gently 
reapply to the surface. 

Stubborn dirt may be removed by the application of a small 
quantity of isopropyl alcohol, applied directly to the cleaning 
cloth only, and reworking the effected area. 

Front Panel  The SX25i front panel features a high quality electroplate finish.  

Over time the surface may retain finger marks and may need to 
be cleaned to restore it to original condition. 

Regular Cleaning 
Gently wipe the front panel with a very clean cotton cloth.  Wipe 
across the surface and never in a circular motion. 

Removing Stubborn Marks 
Only attempt this infrequently, as too regular or vigorous 
application may damage the surface. 

Apply a small quantity of any car polish containing carnauba 
wax to a very clean cotton cloth. 

Note:  The car polish must state “Safe for Clear Coats” as the polish 

will therefore contain the absolute minimum amount of 
abrasive compound. 

 

Gently wipe over the front panel in lateral motion, allow to dry 
then gently wipe off with a very clean cotton cloth.