ONKYO FR-N3X User Manual

◆

The following diagram illustrates how to connect an optional 
Onkyo DVD player. Connect the FR-N3X LINE IN jacks to 
the DVD player’s analog audio output jacks.

• To operate the 

 system, you need to change the 

source name in the display to DVD (see page 65). (The 
default source name in the display is LINE.)

• You can operate an Onkyo DVD player using the supplied 

remote controller.

• When you start playing a DVD player, the unit input selec-

tor will automatically switch to the DVD player (DVD).

In addition to the previous examples, a laser disc player, sat-
ellite broadcast tuner, or VCR may also be connected. Con-
nect the analog audio output jacks to the unit’s LINE using 
the audio connection cable.

◆

The following diagram illustrates how to connect an optional 
Onkyo compact disc recorder. Connect the FR-N3X CDR/
TAPE OUT (REC) jacks to the disc recorder’s INPUT (REC) 
jacks. Connect the FR-N3X CDR/TAPE IN (PLAY) jacks to 
the disc recorder’s OUTPUT (PLAY) jacks.

You can connect a CD or DAT recorder that has an optical 
digital audio input to the FR-N3X for digital recording. Use a 
standard optical fiber audio cable for connection. Digital 
recording is allowed only for the first generation. (See 
“Guide to the serial copy management system” on 
page 67.).

• To operate the 

 system, the source name in the dis-

play should be CD-R. (Since the default source name in 
the display is CD-R, you do not need to change the set-
ting. See page 65 for further information.) 

• You can control a connected Onkyo compact disc 

recorder from the FR-N3X’s remote controller.

• When the connected Onkyo compact disc recorder plays 

back, the Input Selector on the FR-N3X is automatically 
switched to CD-R.