ONKYO FR-N3X User Manual
33
This section explains how to perform Synchro recording from a cassette tape deck to an MD in the FR-N3X.
Recording from another Onkyo
System (Synchro Recording)
System (Synchro Recording)
This function is useful when you record CDs while
selecting tracks.
It is also convenient for analog recording from
another Onkyo system.
The following operations are available if you con-
nect an optional Onkyo casette tape deck to the FR-
N3X.
selecting tracks.
It is also convenient for analog recording from
another Onkyo system.
The following operations are available if you con-
nect an optional Onkyo casette tape deck to the FR-
N3X.
– Synchro Recording from the unit CD to the stereo cas-
sette tape deck
– Synchro Recording from the unit MD to the stereo cas-
sette tape deck
– Synchro Recording from the stereo cassette tape deck to the MD unit.
For more information on Synchro recording from a CD or MD to a cassette tape, refer to
the instruction manual for the cassette tape deck.
the instruction manual for the cassette tape deck.
1
Set up the recording source (in this example, a
cassette tape) and insert an MD in the MD
recorder.
cassette tape) and insert an MD in the MD
recorder.
Check the available recording time on the MD.
If the display does not indicate the available recording
time, press DISPLAY repeatedly.
time, press DISPLAY repeatedly.
2
Press REC to set the recorder in recording
standby mode.
standby mode.
3
Play the recording source (in this example, a cas-
sette tape).
sette tape).
The recording starts.
Cancelling Synchro recording
Stop playback of the recording source. The MD recorder
enters Record Standby mode.
Stop playback of the recording source. The MD recorder
enters Record Standby mode.
Checking the recorded data
After recording is complete, press the MD recorder’s
button or the remote controller’s
After recording is complete, press the MD recorder’s
button or the remote controller’s
button for MD. Playback
starts from the top of the recording.
Pausing and selecting a track
When you pause or stop the
source, the MD recorder enters
Record Standby mode. Select a
track, then play the source again.
The MD recording resumes. Note
that when you press the MD
recorder’s button, the MD
recorder stops, but the source
(CD recorder) continues play-
back.
When you pause or stop the
source, the MD recorder enters
Record Standby mode. Select a
track, then play the source again.
The MD recording resumes. Note
that when you press the MD
recorder’s button, the MD
recorder stops, but the source
(CD recorder) continues play-
back.
Numbering the tracks
Press the
REC button at the
point at which you wish to assign
a track number. If you press the
button with a short interval (about
four seconds or less), you will be
unable to assign track numbers.
a track number. If you press the
button with a short interval (about
four seconds or less), you will be
unable to assign track numbers.
1
2
Available recording time
(DISC REMAIN lights up.)
(DISC REMAIN lights up.)
/