Denon AVC-A1HD User Manual

s

Select  subwoofer  output  configuration  and  bass  signal  for
playback.

Select number of subwoofers and configuration.

• THX recommends LFE–THX– mode so that bass interference is less

likely to occur in the room.

• This  can  be  set  when  the  GUI  menu  “Speaker  Configuration”  –

“Subwoofer” is set to “Yes”.

• Play  music  or  a  movie  source  and  select  the  mode  offering  the

strongest bass.

• Select  “LFE+Main”  if  you  want  the  bass  signals  to  always  be

produced from the subwoofer.

Select bass signal for playing with the subwoofer.

When  “2SP  MIX”  or  “3SP  MIX”  is  selected,  “Subwoofer  1”,
“Subwoofer 2” and “Subwoofer 3” are each displayed.

1SP

SW1

2SP L/R

L

SW1

R

SW2

2SP MIX

1

SW1

2

SW2

3SP L/R/LFE

L

SW1

R

SW2

LFE

SW3

3SP MIX

1

SW1

2

SW2

3

SW3

Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.

:  Display when “Meters” is set.

:  Display when “Feet” is set.

Set the space between each speaker to less than 6.00 m (20.0 ft).

Two  surround  back  speakers  are  required  to  use  the  THX  Ultra2
Cinema, THX Music mode and THX Games mode.
Set the surround back speakers so that the distance to the listening
position is the same for both the left and right speakers.
It is also recommended that the deviations of the distance from the
listening position to L and R channel speakers (front left (FL) and front
right (FR), surround left (SL) and surround right (SR), surround back left
(SBL) and surround back right (SBR)) is less than 60 cm (2 ft).

d

Set distance from listening position to speakers.
Before  making  the  settings,  measure  the  distance  from  the
listening position to the different speakers.

Select unit for distance.

Select step (smallest distance).

0.1m   0.01m

:  Can be selected when “Meters” is set.

1ft   0.1ft

:  Can be selected when “Feet” is set.

Resets the settings to the default values.

Select test tone playback method.

f

Adjust channel levels to obtain equal volume from all speakers.

Output test tone.

z

z: The subwoofer volume can be turned “OFF” by pressing

o

when

the subwoofer volume is “–12dB”.