Vocopro DA-3800 PRO User Manual

About the Remote Control

• The area between the remote control and the main

unit must be clear of large obstacles.

• Do not expose the remote control sensor to strong

lighting, especially an inverter type fluorescent

lamp as this may cause the remote control to not

function properly.

Installing Batteries in the Remote Control

1. Turn the remote control over and slide the battery

compartment cover off towards the direction of the

arrow.

2. Insert the AA batteries, positioning them according

to the polarity (+, --) markings on the inside of the

battery compartment.

3. Close the battery compartment cover.

Battery Replacement

If you ﬁnd that the distance between the remote

control and the main unit must be shorter in order to

use the remote control, this means that the batteries

are low and must be changed. Replace both

batteries with new ones.

Battery Notes:

• Use AA batteries.

• Be sure the polarities (+, -) are correct. (See the

illustration inside the battery compartment).

• Remove the batteries when not using the remote

control for an extended period of time.

• If batteries leak, dispose of them immediately.

Avoid skin, clothing and any other contact with the

leaked material. Clean the battery compartment

thoroughly before installing new batteries.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) with

rechargeable (nickel-cadmium) batteries.

Connecting the Power Cable

Plug the supplied AC power cable into the AC inlet

after all other connections are complete and then

plug the AC power cable to an AC wall outlet.

CAUTION

Use the supplied AC cable. Do not use other AC

power cables as doing so may result in ﬁre hazard or

electrical shock.

Image shown is a generic model for reference.

Getting Connected