Xantech MRAUDIO8X8 User Manual
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
21
NOTE: The MRC88 remembers the last volume setting on a power down
and returns to that level when the Zone is powered back up. The ON-VOL
feature will ensure that if the volume was turned off at a loud volume setting,
when it is turned back on it will never go above the preset level (ON-VOL)
setting as a maximum. If user preference is to have the zone always turn on
the last volume set, do not program an ON-VOL Setting.
and returns to that level when the Zone is powered back up. The ON-VOL
feature will ensure that if the volume was turned off at a loud volume setting,
when it is turned back on it will never go above the preset level (ON-VOL)
setting as a maximum. If user preference is to have the zone always turn on
the last volume set, do not program an ON-VOL Setting.
9. Press the ADJ-OFF Button to drop out of the Z-ADJ mode. (Z-ADJ mode
will drop out automatically after 10 seconds).The Z-ADJ settings are now
saved, completing the procedure.
saved, completing the procedure.
10. Repeat Steps 1-9 for each zone.
RESTORE SYSTEM DEFAULT SETTINGS
To restore system default levels, press the recessed Reset Button behind the
MRC88 Front Panel Access Door twice within 1 second. System and Zone
settings will be reset to the settings shown in Table 3.
RESTORE SYSTEM DEFAULT SETTINGS
To restore system default levels, press the recessed Reset Button behind the
MRC88 Front Panel Access Door twice within 1 second. System and Zone
settings will be reset to the settings shown in Table 3.
PROGRAMMING – UNIVERSAL DRAGON™
NOTE: This section only covers the most fundamental aspects of MRC88
programming: Installing the software, Firmware updates, Programming and
testing source IR commands, configuring the keypad source icons and
transferring the project. For complete MRC88 programming instructions, see:
MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the
MRC88, (Page 34) and Programming the Controller, (Page 47).
SOFTWARE INSTALLATION
Universal Dragon™ minimum requirements:
• Windows 2000/XP/Vista
programming: Installing the software, Firmware updates, Programming and
testing source IR commands, configuring the keypad source icons and
transferring the project. For complete MRC88 programming instructions, see:
MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the
MRC88, (Page 34) and Programming the Controller, (Page 47).
SOFTWARE INSTALLATION
Universal Dragon™ minimum requirements:
• Windows 2000/XP/Vista
• 1.5GHz Processor or better
• 512MB Ram (1GB recommended)
• 600MB* Hard drive space (more recommended as projects expand)
• .NET Framework 2.0 (included)
• Mouse, USB, RS232 ports
*600MB = 300 MB Universal Dragon™, 300MB DotNet Framework