Xantech MRAUDIO8X8 User Manual
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
33
SAVE PROJECT AS
When programming a project for a new client that is similar or identical to an
existing project, Open the existing project. In the File Menu select Save As,
then enter the new file name as described in Step 4 above. The project will be
saved with the new file name. At this point, the project can be transferred to
the Controller if no additional changes are required, or after making the
necessary changes for the new client.
existing project, Open the existing project. In the File Menu select Save As,
then enter the new file name as described in Step 4 above. The project will be
saved with the new file name. At this point, the project can be transferred to
the Controller if no additional changes are required, or after making the
necessary changes for the new client.
PROJECT RECOVERY
1. In the File Menu, select Base Unit -> Project Recovery -> MRC88.
2. Universal Dragon will extract the project from the MRC88.
3. If the message: ‘Error recovering project.’ displays in the Project
2. Universal Dragon will extract the project from the MRC88.
3. If the message: ‘Error recovering project.’ displays in the Project
Recovery Window, check connection between PC and MRC88. Confirm
Com Port. See: MRC88/MRAUDIO8X8 Installation
Instructions/Troubleshooting, (Page 92) for additional information.
Com Port. See: MRC88/MRAUDIO8X8 Installation
Instructions/Troubleshooting, (Page 92) for additional information.
Figure 26 – Project Recovery
ADVANCED PROGRAMMING
For complete advanced feature programming instructions, see:
MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the
MRC88, (Page 34) and Programming the Controller, (Page 47).
For complete advanced feature programming instructions, see:
MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the
MRC88, (Page 34) and Programming the Controller, (Page 47).