Atlas Sound AARMK2-5 Leaflet

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A.   •    TELEPHONE: (800) 876-3333   •   FAX: (800) 765-3435

©2006 ATLAS SOUND LP 

Printed in U.S.A. 

 00406 

ATS002329 RevA 04/06 

PP 

 

• (2) Rack Ears

 

• (4) Rack Ear Chassis Screws

 

• (1) Rack Extension Plate for Single Unit Mounting

 

• (2) Screws to Combine Extension Plate to Rack Ear

 

• (2) Nuts to Secure Screws to Extension Plate and Rack Ear

 

• (2) Bottom Joiner Plates

 

• (4) Bottom Joiner Plate Screws

 

• (4) Rack Rail Screws with Plastic Washers

 

1. Disconnect amplifier from electrical source.

 

2. Remove the four feet from the bottom of each unit.

 

3. Align and secure the two joiner plates to the bottom of units with the enclosed screws. 

 

 

Note: Both plates must be attached, one towards the front and one towards the back. 

 

4. Remove front two screws from the sides of the amps.

 

5. Align the enclosed rack ear to these chassis holes. 

 

6. Use the enclosed chassis screws to attach the rack ears to either side of the amplifiers.

 

 

Secure firmly, do not over tighten.

 

7. Install into rack using rack rail screws and washers provided.

 

8. Disregard any additional pieces.

FRO

NT

PLA

TE

REAR

PLA

TE

Illustration 1: Rack Mounting Two Amplifiers