Yamaha YSP-4300 User Manual

Adjust the brightness of the front panel display. The smaller the 
value, the dimmer the display.
When the Eco function is enabled, the specified brightness is 
applied for only a few seconds.
Selectable item: -4 to -1, 0* (brightest)

Use to select the language used for menus displayed on the TV 
screen.
Selectable item: 

DEUTSCH (German), FRANÇAIS (French), ESPAÑOL
(Spanish), ITALIANO (Italian), NEDERLANDS (Dutch),
РУССКИЙ (Russian), SVENSKA (Swedish)
 “

”: Menus are displayed in Japanese. 

 “ENGLISH”: Menus are displayed in English. 
 “DEUTSCH”: Menus are displayed in German. 
 “FRANÇAIS”: Menus are displayed in French. 
 “ESPAÑOL”: Menus are displayed in Spanish. 
 “ITALIANO”: Menus are displayed in Italian. 
 “NEDERLANDS”: Menus are displayed in Dutch. 
 “

РУССКИЙ”: Menus are displayed in Russian. 

 “SVENSKA”: Menus are displayed in Swedish. 

Use to change the display unit of measurement.
Selectable item: METERS, FEET*
If units used for displaying measurements are changed from 
“METERS” to “FEET” or vice versa, the change will not be 
reflected in current settings. Configure settings again to reflect 
the change in units.

Display information for the audio and video signal input to this 
unit.

The following information on the current audio input signal is 
displayed.

The following information on the current video input signal is 
displayed.

Display the version of firmware currently installed on this unit.

Format

Digital audio format

Number of 
channels

The number of channels contained within the input 
signal—front/surround/low field effects (LFE). 
Example: “3/2/0.1” means signal contains 3 front 
channels, 2 surround channels, and LFE.
If the signal contains channels other than front, 
surround, and LFE, the total number of channels 
may be displayed. Example: “5.1ch”.

Sampling 
frequency

The sampling frequency of the digital input signal

Bit rate

The per-second bit rate of the input signal

Type

HDMI or DVI

Resolution

Video signal resolution

• Hold down the SETUP key to display “OSD LANGUAGE” directly 

on the TV screen.

• The settings may be changed automatically when using the TV which 

supports the HDMI control function.

• Display language can only be selected for menus displayed on the TV 

screen. Only alphanumeric characters are displayed in the front panel 
display.

Audio bit rate may not be displayed for some input signals.

y

y