Yamaha YST-MSW5 User Manual

 

ii

 

Grounding or Polarization — Precautions should be 
taken so that the grounding or polarization is not 
defeated.

 

If the socket outlets in the home are not suitable for the plug 
supplied with this appliance, it should be cut off and an appropri-
ate 3 pin plug fitted. For details, refer to the instructions 
described below.

 

The plug severed from the mains lead must be 

destroyed, as a plug with bared flexible cord is hazardous if 
engaged in a live socket outlet.

 

This product, when installed as indicated in the 

instructions contained in this manual, meets FCC require-
ments. Modifications not expressly approved by Yamaha 
may void your authority, granted by the FCC, to use the 
product.

 

 When connecting this product to accesso-

ries and/or another product use only high quality shielded 
cables. Cable/s supplied with this product MUST be used. 
Follow all installation instructions. Failure to follow instruc-
tions could void your FCC authorization to use this product 
in the USA.

 

This product has been tested and found to comply 

with the requirements listed in FCC Regulations, Part 15 for 
Class “B” digital devices. Compliance with these require-
ments provides a reasonable level of assurance that your 
use of this product in a residential environment will not result 
in harmful interference with other electronic devices. 

This equipment generates/uses radio frequencies and, if not 
installed and used according to the instructions found in the 
users manual, may cause interference harmful to the opera-
tion of other electronic devices. 

Compliance with FCC regulations does not guarantee that 
interference will not occur in all installations. If this product 
is found to be the source of interference, which can be 
determined by turning the unit “OFF” and “ON”, please try 
to eliminate the problem by using one of the following 
measures:

Relocate either this product or the device that is being 
affected by the interference.

Utilize power outlets that are on different branch (circuit 
breaker of fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient 
the antenna. If the antenna lead-in is 300 ohm ribbon lead, 
change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory 
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the appro-
priate retailer, please contact Yamaha Corporation of 
America, 6600 Orangethorpe Ave, Buena Park, CA 90620

The above statement apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.

 

THE WIRE IN THE MAINS LEAD ARE COLOURED IN 
ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of this appara-
tus may not correspond with the coloured markings identify-
ing the terminals in your plug. Proceed as follows: 
The wire which is coloured BLUE must be connected to the 
terminal which is marked with the letter N or coloured 
BLACK. The wire which is coloured BROWN must be con-
nected to the terminal which is marked with the letter L or 
coloured RED. Making sure that neither core is connected to 
the earth terminal of the three pin plug.

 

(FOR CANADIAN CUSTOMERS)

THIS CLASS B DIGITAL APPARATUS MEETS ALL 
REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.

 

(POUR LES CONSOMMATEURS CANA-

DIENS)
CET APPAREIL NUMERIQUE DE LA CLASSE B 
RESPECTE TOUTES LES EXIGENCES DU REGLEMENT 
SUR LE MATERIEL BROUILLEUR DU CANADA.

 

Apparaten kopplas inte bort från växelströmskällan (nätet) 
så länge som den är ansluten till vägguttaget, även om 
själva apparaten har stängts av.

 

Netspæendingen til dette apparat er IKKE afbrudt, 
sålæenge netledningen siddr i en stikkontakt, som er t endt 
– også selvom der or slukket på apparatets afbryder.
Prima di predisporre questo interruttore, staccare å spina 
del cavo di alimentazione dell’apparecchio dalla presa di 
corrente alternata di rete.

 

Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko lait-
etta verkosta.