Yamaha CC-70S User Manual

Press the TUNER input selector button.

Tune to the desired station. (Refer to the “TUNING
OPERATION” on pages 22 and 23.)

Load a tape into the cassette compartment.

When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
*

For selection of the Dolby B or C position, refer to the 
“Dolby B and C Type Noise Reduction” on page 28 or
30.

Set the reverse mode switch to 

to record on only one

side, or to 

(or 

) for continuous recording on both

sides.

Press the REC/PAUSE button.
*

The corresponding indicator lights up and the play
direction indicators flash.

Press the play 

button to record on side A, or the play

button to record on side B.

*

For continuous recording on both sides, begin on side
A. Recording stops automatically at the end of side B.

Press the REC/PAUSE button.

To resume recording, press the play button whose
indicator is flashing.

Press the stop 

button.