Lucent Technologies 585-210-940 User Manual

2

The 

olds

 commands, which you will be using to configure the 

Solstice 

DiskSuite software, obtain information about your disk configuration from 
the 

/olds/disk.type file. If your boot disks are not as specified in the Disks 

table in Step 2, check the 

disk.type file to verify that it names the proper 

boot disks for your system. 

The relevant portion of the 

disk.type file looks like this:

The 

bootdisk1 column designates the first boot disk; the disk2 column 

designates the second boot disk in a mirrored configuration. In order for 
the 

olds commands to work, the disks.type file must match your physical 

configuration: you must have disks in the locations specified in the file.

2

1. Set the environment to the Korn Shell by entering these commands:

(where 

<ctrl-H> indicates you should press and hold the Control key 

as you press the H key).

The 

stty command sets up your backspace key as an actual 

backspace. If you do not enter this command, you will have to use 
the Delete key as a backspace.

2. Make sure the CMS CD is loaded in the CD-ROM drive. 

3. Copy the 

Solstice DiskSuite setup scripts from the CD to the boot 

disk by entering the following commands:

4. Alter your path:

#arch

config

bootdsk1

disk2

scsi control

 

#Enterprise 3000

sun4u

notmirrored

c0t0d0

c0t1d0

dontcare

sun4u

mirrored

c0t0d0

c0t1d0

controllers=0

# stty

erase

<Ctrl-H>

# ksh

-o

vi

# mkdir

/olds

# cp

/cdrom/cdrom0/cms/reloc/rdonly/olds_install/*

/olds

# cd

/olds

# chmod +x /olds/olds

# export

PATH=$PATH:/usr/opt/SUNWmd/sbin:/olds

#