Lucent Technologies 585-210-940 User Manual

3

This procedure completes the operating system installation.

3

If you are running on a 

Sun Enterprise 3500 platform, you must alter the 

/kernel/drv/st.conf file so the operating system recognizes the 3500’s 
8mm tape drive. To accomplish that, do the following steps:

1. Start an editor such as vi or the CDE Text Editor, and load the 

/kernel/drv/st.conf file.

2. Find the 

#tape-config-list= 

line. It should be in the vicinity of 

line number 40.

3. Insert, immediately before that line, the following:

4. Save the file and exit the editor.

1

No action required. When the 
installation completes, the 
machine reboots and prompts 
for a root password.

On this screen you can create a 

root password.

.

.

.

Root password:

Press Return to continue.

2

Enter the same password you 
had before you began the 
installation. 

Please reenter your root 

password?

Press Return to continue.

3

Enter the password again.

. . .

syslog services starting.

Print services started.

volume management starting.

The system is ready.

<hostname> console login:

4

Log in as the root user.

#

# Begin CMS tape configuration list.

tape-config-list=

"EXABYTE EXB-8900","Mammoth EXB-8900 8mm Helical 

Scan","EXB-8900",

"TANDBERG TDC 4200", "Tandberg 2.5 Gig QIC", "TAND-25G-

FIXED",

"TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-FIXED";

EXB-8900 = 1,0x29,0,0xce39,4,0x7f,0x7f,0x7f,0x7f,0;

TAND-25G-FIXED = 1,0x37,512,0x867a,1,0x00,0;

TAND-8G-FIXED = 1,0x37,512,0x963a,4,0xA0,0xD0,0xD0,0xD0,3;

# End CMS Tape configuration list.