Lucent Technologies 585-210-940 User Manual
Maintaining Mirrored Systems
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
State Database Replicas
75
State Database Replicas
3
Setting up replicas
3
1. Verify that the /etc/opt/SUNWmd/md.tab file is correct (see
2. Enter the
metadb
command:
Replacing replicas
3
Sometimes replicas may have to be replaced. A replica can become
corrupted, for example, and in that case needs to be removed and then
recreated. The procedure to do that is as follows:
corrupted, for example, and in that case needs to be removed and then
recreated. The procedure to do that is as follows:
1. Remove all existing replicas with the following command:
Do not reboot the system after removing replicas! With replicas gone,
the system may not boot!
the system may not boot!
2. Recreate two replicas on the same partition:
#
metadb -a -c4 -f /dev/dsk/c0t0d0s1
#
metadb -a -c3 -f /dev/dsk/c0t1d0s1
#
metadb
-d
-f
/dev/dsk/c0t0d0s1
#
metadb
-d
-c4
-f
/dev/dsk/c0t0d0s1
!
WARNING: