Mission MS-8 User Manual
A/V Processor Connections
Stereo Line Output Connections
Pre Out - Main In Connections
Speaker Level Connections
Your subwoofer has been designed for optimum performance
with a Digital processor. If your AV processor has a line level or
LFE subwoofer output you should use this connection. You will
need to purchase a single screened RCA phono lead from your
dealer. Connect this lead to the LFE/R input of the Subwoofer as
shown.
with a Digital processor. If your AV processor has a line level or
LFE subwoofer output you should use this connection. You will
need to purchase a single screened RCA phono lead from your
dealer. Connect this lead to the LFE/R input of the Subwoofer as
shown.
Alternatively, you may use a split mono lead from the processor
to both inputs of the subwoofer. In this case the input level at the
subwoofer will be slightly higher.
to both inputs of the subwoofer. In this case the input level at the
subwoofer will be slightly higher.
If your amplifier has a spare preamplifier output or a stereo sub-
woofer output, connect the sub-woofer as shown. You will need
a stereo screened RCA phono cable.
woofer output, connect the sub-woofer as shown. You will need
a stereo screened RCA phono cable.
If you use a stereo pre and power amplifier, or a stereo amplifier
where the pre and main amplifier can be separated, connect
the sub-woofer as shown. You will need two screened RCA ‘Y’
adaptors and two single RCA phono cables.
where the pre and main amplifier can be separated, connect
the sub-woofer as shown. You will need two screened RCA ‘Y’
adaptors and two single RCA phono cables.
Remove the Pre-Main links on your amplifier. Connect the RCA
‘Y’ adaptors and cables as shown. Connect one leg of the ‘Y’
adaptor to the Left Channel Pre Out socket on the amplifier and
the other leg to the Left Channel Main In socket. Connect the
remaining plug on this combination to the Left Channel Line
Level Input on the sub-woofer. Repeat this for the Right Channel.
‘Y’ adaptors and cables as shown. Connect one leg of the ‘Y’
adaptor to the Left Channel Pre Out socket on the amplifier and
the other leg to the Left Channel Main In socket. Connect the
remaining plug on this combination to the Left Channel Line
Level Input on the sub-woofer. Repeat this for the Right Channel.
The high level Speaker connections should be used only if your
amplifier does not have a line level subwoofer output. In this
connection the subwoofer is fed together with the Front
loudspeakers. For this you will need two extra twin core cables.
amplifier does not have a line level subwoofer output. In this
connection the subwoofer is fed together with the Front
loudspeakers. For this you will need two extra twin core cables.
Connect the Left Speaker Terminals on the subwoofer to the
Front Left speaker terminals on the amplifier. Connect the Red (+)
speaker terminal on the amplifier to the Red (+) terminal on the
subwoofer. Connect the Black (-) speaker terminal on the
amplifier to the Black (-) terminal on the subwoofer. Now
connect the Right Speaker terminals on the subwoofer to the
Front Right speaker terminals of the amplifier.
Front Left speaker terminals on the amplifier. Connect the Red (+)
speaker terminal on the amplifier to the Red (+) terminal on the
subwoofer. Connect the Black (-) speaker terminal on the
amplifier to the Black (-) terminal on the subwoofer. Now
connect the Right Speaker terminals on the subwoofer to the
Front Right speaker terminals of the amplifier.
Measure out two loudspeaker cables
of the appropriate length.
of the appropriate length.
Prepare the cables as shown.
CENTRE
FRONT
REAR
LEFT
LEFT
RIGHT
RIGHT
Subwoofer Out (Line Level)
AV AMPLIFIER
CENTRE
FRONT
REAR
LEFT
LEFT
RIGHT
RIGHT
LEFT
RIGHT
AMPLIFIER
L
R
PRE
OUT
MAIN
IN
(x2)
CENTRE
FRONT
REAR
LEFT
LEFT
RIGHT
RIGHT
L
R
AV AMPLIFIER
Stereo Outputs (Line Level)
7
R
L
SPEAKER LEVEL INPUTS
LEFT
SUBWOOFER
RIGHT
AMPLIFIER
TO FRONT
SPEAKERS
SPEAKERS
Connecting the
MS-10
Subwoofer
10
The Mission
and
Powered Subwoofers
MS-8
MS-CUBE
NUMERICAL KEY
b
b
c
d
f
e
g
h
i
j
1)
1!
Phase Control
Speaker Level Inputs
Line Level Outputs
Line Level Inputs
Volume Control
Volume Control
Crossover Frequency Control
Auto Power Switch
Mains Power Indicator
Mains Power Indicator
Mains ON/OFF Switch
IEC Mains Input Socket
Mains Power Fuse
IEC Mains Input Socket
Mains Power Fuse
6
b
c
c
d
e
e
f
g
h
1!
j
1)
1)
i
INPUT
OUTPUT
VOLUME
LEFT
RIGHT
POWER
AUTO
PHASE
Serial Number
Serial Number
180°
ON
0°
OFF
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
CAUTION:
ATTENTION:
OFF
ON
REPLACER LE FUSIBLE.
FUSIBLE.
UTILISER UN FUSIBLE DE
RECHANGE DE MEME TYPE
ET CALIBRE
DISCONNECT SUPPLY CORD
BEFORE CHANGING FUSE.
FUSE.
REPLACE ONLY WITH SAME
TYPE FUSE AND RATING
35Hz
45Hz
55Hz 65Hz
75Hz
85Hz
AC220-240V 50Hz 150W
AC220-240V 50Hz 150W
FUSE T3.15AL250V
FUSE T3.15AL250V
CROSSOVER
FREQUENCY
0
10
Power Inlet
Power Inlet
Power
LINE LEVEL
SPEAKER LEVEL INPUTS
R
L
MS-CUBE
Active Subwoofer
N21090
b
c
c
d
e
e
f
g
h
1!
j
1)
1)
i
Preliminaries
Attaching Spikes (
)
Power Connections
Open the carton and remove all the top packing pieces. Lift
the subwoofer out carefully. DO NOT lift the subwoofer out of
the carton using the protective bag. The unit is heavy; if you
cannot
manage it easily, get assistance.
the subwoofer out carefully. DO NOT lift the subwoofer out of
the carton using the protective bag. The unit is heavy; if you
cannot
manage it easily, get assistance.
Retain the packing materials. If you decide not to keep the
packing, please dispose of it having regard to any recycling
regulations in your area. Please retain the user manual. If you
transfer this equipment to a third party, please ensure all the
instructions are passed on with the product.
packing, please dispose of it having regard to any recycling
regulations in your area. Please retain the user manual. If you
transfer this equipment to a third party, please ensure all the
instructions are passed on with the product.
Spikes may be fitted if required. To fit the spikes, follow the
instructions for the
instructions for the
on the previous page.
The subwoofer is factory set to operate from the mains voltage
marked on the amplifier panel. Before connecting check this
voltage is correct for your mains supply.
marked on the amplifier panel. Before connecting check this
voltage is correct for your mains supply.
230 volt products - 220 V to 240 V
115 volt products - 110 Vs to 120 V
If you move to an area with a different mains supply, consult
your dealer for advice.
your dealer for advice.
MS-CUBE
MS-10
!
!
!
7